Features:
Aircleaner: under hood
Cylinder: boron cast iron
Cylinder head: HT200 alloy cast iron with copper and chromium
Crankshaft: modular cast iron
Crankshaft drive: by crankshaft through helical tooth spur gear at blower end
Crankshaft case: grey cast iron
Pistons: aluminum alloy
Injection pump: plunger pump series I (right spiral)
Governor: model T7B-speed, mechanical centrifugal
Cooling system: forced water cooling
Lubrication: oil pressure and splash lubrication
Overall Dimension Diagram:
A. Wheel base: 1625 mm
B. Overall length: 3041 mm
C. Overall width (min.): 1330 mm
D. Heigh over exhaust: 1882 mm
E. Height over safety frame: 2085 mm
Engine Full Load Performance:
Model: Y385
Type: 3-cylinder vertical, water cooled, 4-stroke, swirl combustion chamber
Bore/Stroke: 85/90 mm
Displacement: 1.532L
Compression: 22
Rotations: Counterclockwise (view toward flywheel)
Power Take-Off:
Type: semi-independent dual speed (540 r/min/1000r/min)
Configuration: 35mm/6 spline
Speed/@engine rpm: PTO 540/2077 rpm, PTO 1000/2150 rpm
Steering/Brakes:
Steering type: hydraulic
Service brakes: disc type
Fluid Capacities (filling):
Fuel: 22L
Engine oil sump: 6L
Front drive axle: 4.5L
Cooling water: 8L
Electrical:
Alternator: 2JF200, 200W, 14V Starter: QD100C3, 2.2KW, 12V Battery: 6-Q(A) - 100, 100A.H, 12V Lights: 2 head light, 2 signal light, 1 tail lamp
Clutch:
Type: dual stage, gear operation
Size: 8"
Transmission
Type: 2 x (3+1) x 2 compound type
Fwd/Rev. speed: 12F/4R
Gears: 2 x 2
Ranges: 3
Options: none
Synchronization: none
Speed range: 0.31-25.97 km/hr / 0.24-5.96 km/hr
Performance:
Maximum PTO horse power measure at 2350 rpm: 25 HP
Hydraulics:
Type: closed center
Flow/Pressure: 16MPA
Type of pump: CBN-E314 gear pump
Max. flow at remove valves: 9dm3
Number of remove valves: 1
Type of remove valves: safety valve
3-Point:
Category: 1
Aux. lift cyl: std.
Lift cap @ hitch pt: 3900N (at 610mm behind lift point)
Controls: position
Chassis Data:
Pendulum angle of front axle: 12 degrees
Tires: front wheel 6.00-16, rear wheel 9.5-24
Tire inflation pressure (kpa): front wheel 180-200, rear wheel (in field) 100-120, rear wheel (transportation) 120-140
Speed Ranges:
|
Gear |
Ranges |
|
km/hr |
|
1 |
Low |
Creep |
0.32 |
|
2 |
Low |
Creep |
0.64 |
|
3 |
Low |
Creep |
1.06 |
|
1 |
High |
Creep |
1.40 |
|
2 |
High |
Creep |
2.94 |
|
3 |
High |
Creep |
4.91 |
|
1 |
Low |
Fast |
1.73 |
|
2 |
Low |
Fast |
3.42 |
|
3 |
Low |
Fast |
5.70 |
|
1 |
High |
Fast |
7.99 |
|
2 |
High |
Fast |
15.79 |
|
3 |
High |
Fast |
26.35 |
|
R1 |
Low |
Creep |
0.26 |
|
R2 |
High |
Creep |
1.18 |
|
R1 |
Low |
Fast |
1.37 |
|
R2 |
High |
Fast |
6.34 |
